TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 329 of 1168

OPERATION - Continued

4.

Connect two winch pressure lines (3) to male connector (4) and female connector (5)

located on bottom of hook arm assembly.

5.

Turn LHS MODE SELECT switch (6) to AUTO.

CAUTION

•

Do not set PTO ENGAGE switch to ON with HIGH IDLE switch ON.

Engaging the PTO with HIGH IDLE switch ON may result in sudden

application of hydraulic pressure to the LHS, resulting in damage to

equipment.

•

PTO ENGAGE switch must be positioned OFF before road transport,

or severe equipment damage could result.

6.

Set PTO ENGAGE switch (7) to ON position. Indicator light (8) will illuminate.

7.

Check to see that curb-side and road-side front pin lock assemblies (9) are engaged

onto bay pins (10).