TM-9-2320-435-10
TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977
TECHNICAL MANUAL; OPERATOR'S MANUAL
JUNE 2009
TM-9-2320-435-10 - Page 693 of 1168
OPERATOR MAINTENANCE
MANUALLY BYPASSING SOLENOID DURING ELECTRIC POWER LOSS
INITIAL SETUP:
Not Applicable
PERFORM PROCEDURE
NOTE
•
Manual mode operations using the cab control box are to be
performed only when the normal AUTO mode electric circuit is
malfunctioning.
•
When determined necessary, the solenoid bypass procedure may be
used to perform CBT operations.
1.
Locate hydraulic manifold assembly cover (1) on driver side of vehicle.
1
Figure 1.
2.
Open hydraulic manifold assembly cover (1). Instructional placard (2) is on inside of
cover (1).
////////////////////////////////////////////////////////////////////////////////////
TM 9-2320-435-10
0111
0111-1
////////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Back to Top
