TM-9-2320-435-10

TRUCK, COMMON BRIDGE TRANSPORT (CBT), 8X8, M1977

TECHNICAL MANUAL; OPERATOR'S MANUAL

JUNE 2009

TM-9-2320-435-10 - Page 716 of 1168

PERFORM PROCEDURE - Continued

21.

Release joystick (13) when front end of the BAP is about 1 ft. (30 cm) off the ground.

22.

Set HIGH IDLE switch (12) to OFF position.

23.

Move joystick (13) to UNLOAD and continue unloading until the BAP rests on the

ground and weight of load is off LHS lifting hook.

24.

Apply service brake pedal (5), or pull out PARKING BRAKE control (7).

25.

Remove lockpin (14), pin (15), and bail bar lock (16) from LHS lifting hook (17).

16

15

14

17

Figure 8.

NOTE

Vehicle may be equipped with either a analog or digital CBT control panel,

the differences are displayed below.

26.

Move joystick (13) to UNLOAD.

////////////////////////////////////////////////////////////////////////////////////

TM 9-2320-435-10

0113

0113-8

////////////////////////////////////////////////////////////////////////////////////

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////