TM-9-2320-440-13-P

TERMINAL HIGH ALTITUDE AREA DEFENSE (THAAD) CARRIER

TECHNICAL MANUAL; OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

AUGUST 2010

TM-9-2320-440-13-P - Page 134 of 1616

TM 9-2320-440-13&P

0016-32

0016

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CAUTION

Engine speed must be at idle before using hydraulic selector switch.

Failure to

comply may result in damage to equipment.

21.

On both vehicles, turn hydraulic selector switch (12) to OFF position.

22.

Move PTO ENGAGE switch (10) to OFF position on operable vehicle. Make sure indicator light (11)

extinguishes.

23.

Shut off engine on operable vehicle (

24.

On disabled vehicle, turn ignition switch (13) to OFF.

CAUTION

Safety wire(s) on MRP solenoid(s) must be replaced.

Failure to comply may result

in damage to equipment.

NOTE

Stem on MRP solenoids will retract back into solenoid when returned to original position.

25.

Turn stem(s) (19) 1/4 turn counterclockwise to position stem(s) (19) back to original position and install

safety wire(s) (17) on MRP solenoid(s) (18) that had safety wires cut.

THAAD0481A

TM 9-2320-347-10)