TM-9-2330-202-13-P
TRAILER, CARGO, 3/4-TON, 2-WHEEL: M101A1, M101A2 AND M101A3; TRAILER, CHASSIS, 3/4-TON, 2-WHEEL: M116A1 AND M116A2; TRAILER, CHASSIS, 1-TON, 2-WHEEL: M116A3
TECHNICAL MANUAL; OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
DECEMBER 2011
TM-9-2330-202-13-P - Page 112 of 552
MALFUNCTION
CORRECT VOLTAGE NOT PRESENT AT PRIME MOVER RECEPTACLE
CORRECTIVE ACTION
1.
Disconnect intervehicular cable at prime mover receptacle.
2.
Check prime mover receptacle for correct voltage (24 VDC). Repair or replace intervehicular cable
if voltage is incorrect (WP
0041).
3.
Reconnect intervehicular cable to prime mover receptacle.
4.
Verify problem is solved.
5.
If lamps/LED'S are still dim or flickering, troubleshoot prime mover electrical system (refer to TM
for prime mover).
6.
Verify problem is solved.
MALFUNCTION
CHASSIS WIRING HARNESS CONNECTORS ARE DIRTY, CORRODED, OR HAVE BENT PINS
CORRECTIVE ACTION
1.
Disconnect intervehicular cable from chassis wiring harness.
2.
Check chassis wiring harness connectors for dirt or corrosion. Clean chassis wiring harness
connectors if dirt or corrosion is present.
3.
Check chassis wiring harness connectors for bent pins. Repair or replace chassis wiring harness
connectors if pins are bent.
4.
Reconnect intervehicular cable to chassis wiring harness.
5.
Verify problem is solved.
MALFUNCTION
INTERVEHICULAR CABLE GROUND TERMINAL IS DAMAGED OR DISCONNECTED
CORRECTIVE ACTION
1.
Check to see if ground terminal lug at junction on roadside drawbar is connected and in
good condition.
2.
Check ground terminal wire for continuity. If no continuity, repair or replace ground terminal
(WP
0041).
3.
Verify problem is solved.
MALFUNCTION
DEFECTIVE OR BROKEN LAMPS OR LED'S INSIDE TAILLIGHT
CORRECTIVE ACTION
1.
Replace defective or broken lamps or LED'S.
2.
Verify problem is solved.
TM 9-2330-202-13&P
0018
0018-2
Back to Top
