TM-9-2330-227-14-P

SEMITRAILER, VAN: SHOP, 6-TON, SINGLE AXLE, M146

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JUNE 1985
TM-9-2330-227-14-P

  TM-9-2330-227-14-P - Page 546 of 576

TM 9-2330-227-14&P
TORQUE VALUES - CONTINUED
NOT E
Always use the torque values listed when specific torque values are not available.
Do not use listed values in place of those specified in other sections of this manual;
special attention should be observed when using SAE Grade 6, 7, and 8 capscrews.
The above is based on use of clean, dry threads.
Reduce torque by 10 percent when engine oil is used as a lubricant.
Reduce torque by 20 percent if new plated capscrews are used.
Capscrews threaded into aluminum may require reductions in torque of 30 percent or
more of Grade 5 capscrews torque and must attain two capscrew diameters of thread
engagement.
H-2


Back to Top