TM
9-2330-238-14
2-13.
EXPANDING
AND
RETRACTING
VAN BODY (M313)
(Con’t).
(11)
(12)
to ensure
a tight
Inside
van, jump
on both hinged
floors
(16) to ensure that no binding
of alinement
pins exists.
Move outside
of van and apply full weight
on ratchet wrench to both retractable
beam drive shafts (2)
seal.
(13)
From inside
van,
engage
six clamp
locks
(11) on swivel
hooks
(10) and draw
side
walls
(8), end
panel
doors
(1), and ceiling
panels
tight against
seals.
Start with center
clamp lock
on each
side.
(14)
Ensure that sliding
bolt
(12) on each end panel
door
(1) is fully
extended
into latch
(17).
(15)
Engage
four side wall
corner
locks
(4) in extension
rods
(7).
TA701919
2-15