TM-9-2330-247-14-P

CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353

TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)

MARCH 1992

TM-9-2330-247-14-P - Page 298 of 320

TM 9-2330-247-14&P

Section Il. MANUFACTURING INSTRUCTIONS

1.

2.

3.

Manufacture from part number 10905840, strap, tie-down, electrical.

Cut length as required for installation.

Round edges may be obtained by fusion.

Figure G-1. Tie-down Support Strap.

1. Slip coupling nuts over end of air hose.

2. Place compression sleeves on air hose ¼ in. from end.

3. Push inserts into air hose end until flush.

Figure G-2. Air Hose Coupling Nuts.

1. Manufacture from hose, nonmetallic, NSN 4720-01-014-4915, part number 246115.

2. Cut to 20 in. long to make part number 10893123-1.

Figure G-3. Relay Valve-to-Airbrake Chamber Air Hose.

1. Manufacture from hose, nonmetallic, NSN 4720-01-014-4915, part number 246115.

2. Cut to 10 in. long to make part number 10893123-2.

Figure G-4. Air Filter-to-Relay Valve Air Hose.

TA701125

G-2