TM-9-2330-247-14-P
CHASSIS, TRAILER: GENERAL PURPOSE, 3-1/2 TON, 2-WHEEL, M353
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
MARCH 1992
TM-9-2330-247-14-P - Page 45 of 320
TM 9-2330-247-14&P
NOTES:
1. FOR OPERATION OF TRAILER IN PRO-
3. SANDY AREAS.
In sandy areas, halve lubrication
TRACTED COLD TEMPERATURES BELOW -10°F
intervals.
(-23°C).
Remove lubricants prescribed in the Key for
temperatures above -10°F (-23°C). Clean parts with
4. MASTER CYLINDER.
Remove cap and fill mas-
dry cleaning solvent (Item 12, Appendix E). Lubricate
ter cylinder to within ½ in. (13 mm) from filler opening
with lubricants specified in the Key for temperatures
with BFS.
of 0°F to -65°F (-18°C to -54°C).
5. WHEEL BEARINGS.
Annually, remove, clean,
2. OIL CAN POINTS.
Every 1000 miles (1600 kilo-
dry, and pack wheel bearings (TM 9-214).
meters) or semiannually, lubricate handbrake levers
6. RETRACTABLE SUPPORT.
There are two
with appropriate PL.
grease fittings on retractable support. Third grease fit-
ting is in frame where retractable support is mounted.
TA701042
3-5
Back to Top
