TM-9-2330-326-14-P

SEMITRAILER, TACTICAL, DROP DECK BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, M871A3

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

FEBRUARY 2006

TM-9-2330-326-14-P - Page 187 of 540

TM 9-2330-326-14&P

7-15

7-5. REAR BUMPER ASSEMBLY REPLACEMENT.

This Task Covers:

a. Removal

b. Installation

c. Follow-On Tasks

Initial Setup:

Tools and Special Tools:

References:

Tool kit, general mechanic’s (Item 4, Appendix B-3)

Appendix C

Paragraph 7-1

Equipment Conditions:

TM 9-237

Landing legs down

Semitrailer disconnected from prime mover

NOTE

See Paragraph 7-1 for additional service requirements and TM 9-237

for welding instructions.

a. Removal.

Remove welded rear bumper assembly (1) from trailer.

b. Installation.

1.

Weld rear bumper assembly (1) onto trailer.

2.

Weld on four D-rings saddles with rings, new.

3.

CARC paint rear bumper assembly (1).

4.

Add conspicuity tape.

5.

Lube D-rings.