TM-9-2330-326-14-P

SEMITRAILER, TACTICAL, DROP DECK BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, M871A3

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

FEBRUARY 2006

TM-9-2330-326-14-P - Page 219 of 540

TM 9-2330-326-14&P

C-3

C-4.

LUBRICATION CHART AND DIAGRAM (Cont.)

Clean fittings before lubrication using cleaning compound. Dry before lubricating.

The dotted leader lines indicate lubrication is required on both sides of the equipment.

Re-lubricate after washing or fording as necessary.

Table C-1. Lubrication Chart.

LUBRICATION

POINTS

INTERVAL

LUBRICATION TYPE/SPECIAL

INSTRUCTIONS/MAINTENANCE

LEVEL

(

)

ABS Sensor Body and

Spring Clip

When replaced or removed from

clip

GAA, light coat on sensor body,

wipe off excess. When removed

from spring clip, clean off old grease

and apply a new light coat. (O)

Automatic Slack

Adjuster

Semiannually or every 6,000 miles

(9,656 km)

GAA, zerk fittings. (O)

Semiannually or every 6,000 miles

(9,656 km)

OE/HDO-10, clevis pins, oil can

points. (O)

Stowage Box and

Padlocks

Monthly or every 1,000 miles

(1,609 km)

OE/HDO-10, hinge/latch, oil can

points. (C)

Twist Locks (8)

Monthly or every 1,000 miles

(1,609 km)

Clean, oil can point

OE/HDO-10 for housing. (C)

GAA, zerk fittings (O)

Tiedown Rings

Cargo (36)

Ammo (4)

Lift/Tie-down (12)

Monthly or every 1,000 miles

(1,609 km)

OE/HDO-10, oil can points. (C)

Landing Gear Shoes,

Swing Pins, and Crank

Handle

Monthly or every 1,000 miles

(1,609 km)

OE/HDO-10, oil can points. (C)

All Receptacle Pins

and Connectors

When Taken Apart/Replaced

Dielectric Grease. Clean and Apply

a Thin Coat. (O)