TM 9-2330-326-14&P
H-77
H-28. TROUBLESHOOTING BRAKE DRUMS (Cont.)
EXAMPLE
PROBLEM
CAUSE
SOLUTION
Photo Not
Required For
Explanation
Out-of-round:
variation in
diameter
Out-of-round:
concentricity
Excessive wear
Heat distortion
Improper fit to pilot or
improper seating on
wheel or hub
Abrasive material
between lining and drum
or poor quality lining
Re-bore brake drum within
normal limits or replace.
See maintenance
instructions regarding
turning of brake surface.
Clean all mounting
surfaces. Check for
correct fit and clearance to
wheel.
Check maximum
diameter and re-bore
within limit or replace.
See maintenance
instructions regarding
turning of brake surface.