TM-9-2330-330-14-P
SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
NOVEMBER 2005
TM-9-2330-330-14-P - Page 337 of 1116
TM 9-2330-330-14&P
0066 00-1
BRAKE ACTUATING CAMSHAFT REPLACEMENT
0066 00
THIS WP COVERS:
Removal, Installation, Follow-On Tasks
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Organizational
Tool kit, general mechanic’s (item 4, WP 0171 00)
Jack stands (item 3, WP 0171 00)
Materials/Parts
Lockwashers (16) (item 130, WP 0175 00)
Equipment Conditions
O-rings (8) (item 22, WP 0175 00)
Retaining rings (4) (item 17, WP 0175 00)
Semitrailer disconnected from prime mover (refer
to WP 0007 00)
Semitrailer grounded (refer to WP 0007 00)
References
WP 0044 00
Axles supported by jack stands (refer to
WP 0007 00)
Wheel assemblies removed (refer to WP 0007 00)
Brakedrum assemblies removed (refer to
WP 0068 00)
Brakeshoes removed (refer to WP 0067 00)
Slack adjusters removed (refer to WP 0069 00)
REMOVAL
WARNING
The axle must be firmly supported to prevent shifting of
the semitrailer. Shifting may cause serious injury to
personnel and damage to equipment.
NOTE
There are four brake camshafts and they are replaced
the same way. This procedure replaces one brake camshaft.
Back to Top
