TM-9-2330-330-14-P
SEMITRAILER, FUEL TANKER: 5000-GALLON, FUEL-DISPENSING, AUTOMOTIVE, M969A3
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
NOVEMBER 2005
TM-9-2330-330-14-P - Page 637 of 1116
TM 9-2330-330-14&P
0147 00-1
FUEL INJECTION LINES AND FITTINGS REPLACEMENT
0147 00
THIS WP COVERS:
Removal, Installation, Follow-On Tasks
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Organizational
Tool kit, general mechanic’s (item 4 WP 0171 00)
Materials/Parts Equipment
Conditions
Copper washers (6) (item 62, WP 0175 00)
Copper washers (3) (item 64, WP 0175 00)
Semitrailer disconnected from prime mover (refer
to WP 0007 00)
Semitrailer grounded (refer to WP 0007 00)
Negative terminal disconnected from battery (refer
to WP 0007 00)
REMOVAL
NOTE
There are three sets of fuel injection lines and they are
replaced the same way. This procedure covers one fuel
injection line.
1.
Remove screw (1), copper washer (7), fuel injection return line (8), and copper washer (7) from
ported screw (6). Discard copper washers.
2.
Remove ported screw (6), copper washer (5), fuel supply line (4), and copper washer (5) from fuel
metering pump (3). Discard copper washers.
3.
Loosen coupling nut (2) at fuel metering pump (3).
Back to Top
