TM-9-2330-331-14-P
SEMITRAILER, FLATBED: BREAKBULK/CONTAINER TRANSPORTER, 34 TON, M872A4
TECHNICAL MANUAL; OPERATOR’S, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL WITH REPAIR PARTS AND SPECIAL TOOLS LISTS
DECEMBER 2005
TM-9-2330-331-14-P - Page 84 of 472
TM 9-2330-331-14&P
0012 00
Table 2. Organizational Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ABS WARNING LIGHT
1. ABS WARNING LIGHT
NOTE
COMES ON AND STAYS
ON AT OPERATING
•
The ABS light identifies the center
SPEEDS (ABOVE 4
and rear axles issues.
MPH [6 KM/H])
•
Frequent ABS issues may be the
result of wheel bearings (rollers) out of
adjustment.
1. Turn prime mover (refer to applicable
prime mover TM) ignition switch ON.
2. Count to three and turn OFF ignition
switch.
Immediately
turn switch ON again.
3. The ABS warning indicator light will come
on and then off.
Record ABS blink code and
three times.
4. The ABS blink code will then be displayed
refer to ABS diagnostics per
WP 0012 00-7.
0012 00-6
Back to Top
