TM-9-2330-334-13-P
FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1
TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
DECEMBER 2013
CHANGE 1
TM-9-2330-334-13-P - Page 385 of 1184
TM 9-2330-334-13&P
CLEANING TRAILER
0054 00
0054 00-1
Change 1
THIS WORK PACKAGE COVERS:
General,
Cleaning Trailer
INITIAL SETUP:
Maintenance Level
Materials/Parts (Cont)
Operator
Corrosion Prevention Compound (Item 5,
WP 0165 00)
Brush Set (Item 3, WP 0165 00)
Tools/Special Tools
Gloves, Rubber (Item 6, WP 0167 00)
Personnel Required
Goggles, Industrial (Item 8, WP 0167 00)
Two
Materials/Parts
References
Rag, Wiping (Item 11, WP 0165 00)
TB 43-0213
Soap, Laundry (Item 15, WP 0165 00)
Solvent, Dry Cleaning (Item 17,
Equipment Conditions
WP 0165 00)
Wheels chocked (TM 9-2320-392-10)
GENERAL
This work package contains information and instructions to clean the Load Handling System Trailer (LHST).
WARNING
•
Solvent, Cleaning Compound (MIL-PRF-680) is TOXIC and flammable.
Wear protective goggles and gloves; use only in well-ventilated area;
avoid contact with skin, eyes, and clothes, and do not breath vapors.
Keep away from heat or flame.
Never smoke when using Cleaning
Solvent; the flashpoint for Type I Cleaning Solvent is 100°F (38°C) and
for Type II is 138°F (50°C). When not using MIL-PRF-680 solvents,
ensure MIL-PRF-680 solvent container is sealed. Store, handle, and
dispose of unused and spent solvents in accordance with local
procedures and plans.
Failure to comply may result in serious injury or
death to personnel.
•
If personnel become dizzy while using Dry Cleaning Solvent,
immediately get fresh air and medical help.
If Dry Cleaning Solvent
contacts skin or clothes, flush with cold water.
If Dry Cleaning Solvent
contacts eyes, immediately flush eyes with water and seek medical
attention.
Failure to comply may result in serious injury or death to
personnel.
•
Wear appropriate eye protection when using high pressure water to
clean trailer.
Failure to comply may result in injury to personnel.
•
All cleaning procedures must be accomplished in well-ventilated areas.
Failure to comply may result in injury to personnel or damage to
equipment.
Back to Top
