TM 9-2330-334-13&P
AXLE ASSEMBLY REPLACEMENT - Continued
0067 00
0067 00-11
Change 1
INSTALLATION - Continued
NOTE
•
The following two steps require the aid of two assistants.
•
Both axles are installed the same way.
Rear axle assembly shown.
•
LH and RH equalizing beams are installed the same way.
RH side is shown.
3.
Position equalizing beam (23) on axle assembly (3) with two washers (32), bolts (31), washers (30),
and self-locking nuts (29).
4.
Tighten two self-locking nuts (29) to 760-840 lb-ft (1030-1139 N·m).
5.
Perform previous two steps on LH side equalizing beam.