TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 579 of 1184

TM 9-2330-334-13&P

ANTI-LOCK BRAKE SYSTEM (ABS) POWER AND DIAGNOSTIC

0074 00

CABLE AND DIAGNOSTIC TOOL REPLACEMENT - Continued

0074 00-3

Change 1

REMOVAL - Continued

NOTE

•

Junction box connections for main electrical harness and ABS power and diagnostic

harness must be disconnected to remove ABS power and diagnostic cable from

vehicle.

•

All main electrical harness and ABS power and diagnostic cable terminal lugs are

removed the same way. Junction box terminal lug 1 shown. Refer to

Table 1.

Junction Box Terminal Stud and Main Wiring Harness/ABS Power and

Diagnostic Cable Terminal Lug Locations

for details.

•

Tag all terminal lugs and terminal studs prior to removal.

2.

Remove nut (4), lockwasher (5), TL609 (white ABS power and diagnostic cable ground terminal) (6),

and terminal lug TL261A (7), from junction box terminal stud 1 (8). Discard lockwasher.

3.

Repeat the previous step on remaining main electrical harness and ABS power and diagnostic cable

terminal lugs.

Table 1.

Junction Box Terminal Stud and Main Wiring Harness/ABS Power and Diagnostic

Cable Terminal Lug Locations.

Junction Box Terminal Stud Position

Main Electrical Harness Terminal Lugs

Stud Position 1

TL609, TL261A

Stud Position 2

TL255A

Stud Position 3

TL257A

Stud Position 4

TL256A

Stud Position 5

TL251A, Red ABS Terminal Lug, Blue ABS Terminal

Lug

Stud Position 6

TL253A

Stud Position 7

TL252A