TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 600 of 1184

TM 9-2330-334-13&P

ANTI-LOCK BRAKE SYSTEM (ABS) RELAY VALVE AND BRAKE

PROTECTION VALVE REPLACEMENT – Continued

0075 00

Change 1

0075 00-8

INSTALLATION

WARNING

Adhesive, solvents and sealing compounds can burn easily, can give off

harmful vapors, and are harmful to skin and clothing.

Keep away from open

fire and use in well-ventilated area.

If adhesive, solvent, or sealing compound

gets on skin or clothing, wash immediately with soap and water.

Failure to

comply may result in injury to personnel.

NOTE

•

Perform the following seven steps on rear brake protection valve.

•

Install plastic cable ties as required.

1.

Apply sealing compound to threads of 90-degree fitting (23) and two adapters (27).

2.

Install preformed packing (29) and air filter (28) in rear brake protection valve (26).

3.

Install two adapters (27) in rear brake protection valve (26).

4.

Install tee fitting (25) on adapter (27).

5.

Install 90-degree fitting (24) on tee fitting (25).

6.

Install rear brake protection valve (26) on air tank (13).

7.

Connect two air hoses (23) to 90-degree fitting (24) and tee fitting (25).