TM-9-2330-334-13-P
FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1
TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
DECEMBER 2013
CHANGE 1
TM-9-2330-334-13-P - Page 669 of 1184
TM 9-2330-334-13&P
HEIGHT CONTROL VALVE AND LINKAGE REPLACEMENT\
0084 00
ADJUSTMENT
0084 00-1
Change 1
THIS WORK PACKAGE COVERS:
Removal, Installation, Operational Checks
INITIAL SETUP:
Maintenance Level
Field
Tools and Special Tools
Goggles, Industrial (Item 8, WP 0167 00)
Tool Kit, Genl Mech (Item 24, WP 0167 00)
Wrench, Torque, 0-200 lb-in. (Item 35,
WP 0167 00)
Tape Measure (Item 22, WP 0167 00)
Straight Edge (Item 21, WP 0167 00)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 6, WP 0165 00)
Materials/Parts (Cont.)
Sealing Compound (Item 14, WP 0165 00)
Nut, Self-Locking (2) (Item 26, WP 0168 00)
Nut, Self-Locking (2) (Item 34, WP 0168 00)
Wooden Block 6.12 in. (15.5 cm) high
Equipment Conditions
Trailer uncoupled (WP 0043 24,
TM 2320-392-10-1)
GENERAL
This work package contains information and instructions to replace the Load Handling System Trailer (LHST)
height control valve and linkage.
WARNING
•
Wear appropriate eye protection when working under trailer due to the
possibility of falling debris.
Failure to comply may result in injury to
personnel.
•
Vent air system before disconnecting air hoses.
Pressurized air can blow
dirt and debris with sufficient force to cause injury.
Safety goggles must
be worn when working with compressed air.
Failure to comply may result
in injury to personnel.
NOTE
Tag air hoses and connection points prior to disconnecting.
Back to Top
