TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 691 of 1184

TM 9-2330-334-13&P

WHEEL BEARING/HUB SEAL REPLACEMENT - Continued

0085 00

0085 00-11

Change 1

INSTALLATION - Continued

NOTE

Ensure inner wheel bearing nut is installed on spindle with nub facing out from wheel

end hub.

10.

Position inner wheel bearing nut (9) on spindle (11).

CAUTION

Rotate wheel end hub to the left and to the right while tightening wheel bearing nut.

Failure to comply may result in damage to equipment.

11.

Tighten inner wheel bearing nut (9) to 100 lb-ft (136 N·m).

12.

Loosen inner wheel bearing nut (9) one full turn (360 degrees).

CAUTION

Do not over tighten inner wheel bearing nut.

Failure to comply may result in damage to

equipment.

13.

Hand-tighten inner wheel bearing nut (9).