TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 710 of 1184

TM 9-2330-334-13&P

FRAME RAIL REPLACEMENT - Continued

0087 00

0087 00-12

INSTALLATION – Continued

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off

harmful vapors, and are harmful to skin and clothing.

To avoid injury or

death, keep away from open fire and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound gets on skin or clothing, wash

immediately with soap and water.

Failure to comply may result in injury to

personnel.

NOTE

LH and RH sides of suspension is installed on axle the same way.

LH side is shown.

10.

Position lockwasher (14), washer (13), and nut (12) on air bladder (11).

11.

Tighten nut (12) to 35 lb-ft (47 N·m).

12.

Apply sealing compound to threads of 90-degree fitting (10).

13.

Install 90-degree fitting (10) in air bladder (11).

14.

Connect air hose (9) to 90-degree fitting (10).