TM-9-2330-334-13-P

FAMILY OF MEDIUM TACTICAL VEHICLES (FMTV) LOAD HANDLING SYSTEM TRAILER (LHST) M1147A1

TECHNICAL MANUAL; OPERATOR AND FIELD LEVEL MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

DECEMBER 2013

CHANGE 1

TM-9-2330-334-13-P - Page 916 of 1184

TM 9-2330-334-13&P

MAINTENANCE ALLOCATION CHART (MAC) - CONTINUED

0113 00

0113 00-2

Maintenance Functions – Continued

4.

Adjust.

To maintain or regulate, within prescribed limits, by bringing into proper position, or by setting

the operating characteristics to specified parameters.

5.

Align.

To adjust specified variable elements of an item to bring about optimum or desired

performance.

6.

Calibrate.

To determine and cause corrections to be made or to be adjusted on instruments of Test,

Measurement, and Diagnostic Equipment (TMDE) used in precision measurement. Consists of

comparison of two instruments, one of which is a certified standard of known accuracy, to detect and

adjust any discrepancy in the accuracy of the instrument being compared.

7.

Remove/Install.

To remove and install the same item when required to perform service or other

maintenance functions.

Install may be the act of emplacing, seating, or fixing into position a spare,

repair part, or module (component or assembly) in a manner to allow the proper functioning of an

equipment or system.

8.

Paint.

To prepare and spray color coats of paint so that the ammunition can be identified and

protected.

The color indication primary use is applied, preferably, to the entire exterior surface as the

background color of the item.

Other markings are to be repainted as original so as to retain proper

ammunition identification.

9.

Replace.

To remove an unserviceable item and install a serviceable counterpart in its place. "Replace "

is authorized by the MAC and assigned maintenance level is shown as the third position code of the

Source, Maintenance and Recoverability (SMR) code.