TM-9-2330-335-14-P
SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R
TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)
SEPTEMBER 2008
TM-9-2330-335-14-P - Page 85 of 640
0010-1/(2 blank)
TM 9-2330-335-14&P
0010
ORGANIZATIONAL MAINTENANCE
-
ORGANIZATIONAL TROUBLESHOOTING INTRODUCTION
1.
This chapter provides information for identifying and correcting malfunctions using Organizational
Troubleshooting.
2.
The
Organizational Troubleshooting Symptom Index
in WP 0011 lists common malfunctions which may occur and refers
you to the proper page in WP 0012 for a troubleshooting procedure.
3.
If you are unsure of the location of an item mentioned in troubleshooting, refer to WP 0002 or WP 0004.
4.
Before performing troubleshooting, read and follow all safety instructions found in the
Warning Summary
at the front of
this manual.
5.
The
Organizational Troubleshooting Symptom Index
cannot list all malfunctions that may occur, nor all tests or
inspections and corrective actions. If a malfunction is not listed, or is not corrected by the listed corrective actions, notify
your supervisor.
6.
When troubleshooting a malfunction:
a.
Locate the symptom or symptoms in WP 0011 that best describe the malfunction.
b.
Turn to the page in WP 0012 where the troubleshooting procedures for the malfunction in question are described.
Headings at the top of each page show how each troubleshooting procedure is organized: MALFUNCTION, TEST
OR INSPECTION (in step number order), and CORRECTIVE ACTION.
c.
Perform each step in the order listed until the malfunction is corrected. DO NOT perform any maintenance task
unless the troubleshooting procedure tells you to do so.
EXPLANATION OF HEADINGS
00010
The headings in WP 0012 are defined as follows:
1.
MALFUNCTION.
A visual or operational indication that something is wrong with the equipment.
2.
TEST OR INSPECTION.
A procedure to isolate the problem in a system or component.
3.
CORRECTIVE ACTION.
A procedure to correct the problem.
END OF WORK PACKAGE
2
Back to Top
