TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 16 of 500
WARNING SUMMARY - Continued
WARNING
PARTS UNDER PRESSURE
•
Wear safety goggles and use caution when removing or installing
springs, snap rings, retaining rings, and other parts under spring
tension. These parts can act as projectiles. Failure to comply may
result in injury or death to personnel.
•
During pressure tests, ensure air pressure is drained to 0 psi (0
kPa) before taking off any components. If pressure is not
released, plates or line could blow off and harm personnel. Do
not drain air from tank with any part of body in air spray path. Skin
embolisms and/or debris in eyes can occur from released
pressure.
•
High air pressure may be released from valve stem when valve
core is removed. Stay clear of valve stem after core is removed.
Ensure all personnel wear suitable eye protection. Failure to
comply may result in injury to personnel.
•
Stand clear of trajectory area during deflation or personal injury
or death may result.
•
If there is any residual pressure in tank when relief valve is open,
personnel may lose their balance and fall. Failure to comply may
result in injury or death to personnel.
•
Failure to relieve tank pressure may result in sudden, unexpected
loss of pressure. Failure to comply may result in personal injury
or death.
TM 9-2330-342-10
n
Back to Top
