TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 192 of 500
CONTAINER MODE TO BUMPER - Continued
2
3
4
1
1
5
6
2
Figure 31.
Container Mode to Bumper.
78.
Install lynch pin (Figure 31, Item 6) in hitch pin (Figure 31, Item 5).
79.
Install two hitch pins (Figure 31, Item 1) in cart pivot bracket (Figure 31, Item 3).
80.
Install two lynch pins (Figure 31, Item 2) in hitch pins (Figure 31, Item 1).
81.
Repeat Steps (77) through (80) for right side cart pivot bracket.
82.
Notify field maintenance at earliest opportunity to replace lockwashers and tighten
nuts securing cart to bumper.
END OF TASK
BUMPER TO CONTAINER MODE
NOTE
Left side and right side hitch pins and lynch pins are removed the same
way. Left side shown.
1.
Remove two lynch pins (Figure 32, Item 2) from hitch pins (Figure 32, Item 1).
TM 9-2330-342-10
0025
0025-34
Back to Top
