TM-9-2330-342-10

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; OPERATOR'S MANUAL

SEPTEMBER 2012

TM-9-2330-342-10 - Page 244 of 500

TRANSFER CONTAINER FROM VEHICLE TO TRAILER - Continued

WARNING

Driver has limited vision to rear. Ground guide is required when driving

vehicle in reverse. Failure to comply may result in injury or death to

personnel.

WARNING

Do not stand between trailer and vehicle during backing procedures.

Failure to comply may result in injury or death to personnel.

CAUTION

•

Vehicle must be aligned with trailer. Failure to comply may result

in damage to equipment.

•

Both of the bumper points must be under the vehicle bumper

plate flange and at least one of the bumper points must contact

the bumper plate. The bumper point not contacting the bumper

plate cannot exceed 0.5 in. (12.7 mm) distance from bumper

plate or container will not load properly. Failure to comply may

result in damage to equipment.

13.

With the aid of an assistant, back up vehicle so that trailer bumper (Figure 2, Item 1)

is under bumper plate flange (Figure 2, Item 2) and is in contact with bumper plate

(Figure 2, Item 3). Refer to vehicle Operator's manual (WP

0057).

TM 9-2330-342-10

0026

0026-4