TM-9-2330-356-14
SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
OCTOBER 1990
TM-9-2330-356-14 - Page 36 of 528
TM 9-2330-356-14
Pump (3 in. Model) (Underwing/overwing)
(M970 and M970A1):
Type . . . . . . . . . . . . . . . . . High pressure, centrifugal
Drive . . . . . . . . . . . . . . . . . Shaft from engine
Emergency Valve Control:
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full release
Control . . . . . . . . . . . . . . . . . . . . . . . . . . . Flexible cable
1-11.
Identification and Instruction Plates
(Figs. 1-12 through 1-16)
a. Vehicle Identification Plate.
Mounted on frame on
left side of vehicle. Identifies vehicle model, weight,
dimensions, vehicle identification number, and contract
number.
b.
D.O.T Data Plate.
Mounted on front frame on the
right side between the service brake coupling and the front
marker light. Identifies manufacturer’s serial number,
D.O.T (Department of Transportation) specifications,
shell material, head material, welding specification, and
lining.
c.
Bottom Loading Instruction Plate.
Located on left
side of vehicle above the piping control cabinet. Indicates
instructions for bottom loading.
d.
Flow Rate/RPM Plate.
Mounted on left side of
frame next to the control panel. Gives maximum gallons
per minute at set engine rpm.
e.
Hose Rewind Plate (M969 and M969A1).
Mounted
in hose reel cabinet on each meter mounting plate.
Indicates caution when rewinding hoses.
f.
Hose Rewind Plate (M970 and M970A1).
Mounted
in hose reel cabinet on each meter mounting plate.
Indicates caution when rewinding hoses.
g.
Operating Instructions Plate.
Mounted on tool box
cover. Indicates valve positions for various operating
functions.
h.
Engine Operating Instruction Plate.
Mounted on
left side of frame above the control panel. Gives specific
engine operating instructions.
i.
Precheck Operation Plate (M970 and M970A1).
Mounted on frame next to control panel. Indicates open
and closed position of precheck valve.
j.
Throttle Plate.
Mounted on frame next to control
panel. Indicates direction to increase and decrease
throttle.
k.
Deadman Deactivation Plate (M970 and M970A1).
Mounted in hose reel cabinet on meter mounting plate.
Gives instructions to deactivate deadman control.
l.
Vapor Recovery Plate.
Mounted on frame on left
side of vehicle in front of ground board. Indicates
instructions for vapor recovery operation.
1-16
Back to Top
