TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 263 of 1364

TM 9-2350-238-20-1

Make sure MASTER switch is OFF before repairing electrical

circuits. Failure to observe this warning could result in injury to

personnel.

Step

2.

Disconnect connector from vehicular light switch. Place red probe in pin

socket F (lead 15) of plug. Ground black probe. Set MASTER switch ON.

If multimeter indicates about 24 volts, replace vehicular light switch. Refer

to page 2-566. If multimeter indicates no voltage, go to step 3. Set

MASTER switch OFF. Connect connector to vehicular light switch.

2-237