TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 279 of 1364

TM 9-2350-238-20-1

Step 5.

Place red probe on pin K. Place black probe on pin N. If multimeter

indicates 0 ohms, go to step 6. If multimeter indicates infinity, replace

vehicular light switch. Refer to page 2-566. Connect connector to vehicular

light switch.

Step 6.

Disconnect both leads 75 from brake warning sensitive switch. Connect

multimeter to brake warning sensitive switch leads. Apply brakes. If

multimeter indicates 0 ohms, repair lead 75 between brake warning

sensitive switch and vehicular light switch. If multimeter indicates infinity,

replace brake warning sensitive switch. Refer to page 2-626. Connect

leads to brake warning sensitive switch.

2-253