TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 313 of 1364
TM 9-2350-238-20-1
Step 4.
To access disconnect near batteries, remove left C0
2
cylinder access cover.
Refer to page 2-918. Disconnect wiring harness. place red probe in socket
A (lead 317A). Ground black probe. Set MASTER switch ON. Set HYD
PUMP/PTO CLUTCH switch ON. If multimeter indicates about 24 volts,
repair lead 317A between disconnect near batteries and disconnect near
vehicular drive. Refer to page 2-371. Set MASTER switch OFF. Set HYD
PUMP/PTO CLUTCH switch OFF. Connect wiring harness.
2-287
Back to Top
