TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 472 of 1364

TM 9-2350-238-20-1

2-44. MAINTENANCE OF ENGINE AIR CLEANER SYSTEM.

This task covers:

a.

Removal

b.

Inspection/Repair

c. Installation

INITIAL SETUP

Matetials/Parts

References

Blower inlet air duct hose (figure D-26,

FM 21-40

appx D)

TM 9-2350-238-24P-1

Blower outlet air duct hose (figure D-26,

appx D)

Duct gasket (2)

Forward air separator outlet adapter

gasket

Gasket

Gasket

Lockwasher(16)

Lockwasher (30)

Seal assembly (2)

Self-locking nut (2)

REMOVAL

1

2

3

Contaminated intake filter elements

must be handled using adequate

precautions (refer to FM 21-40) and

must be disposed of by authorized

personnel.

General Safety Instructions

Contaminated intake filter elements

must be handled using adequate

precautions (refer to FM 21-40) and

must be disposed of by authorized

personnel.

Open two air cleaner access doors (1).

Set retainer assembly levers (2) to vertical

position.

Pull two intake filter elements (3) from

compartments.

2-446