TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 984 of 1364

TM 9-2350-238-20-1

2-168. MAINTENANCE OF VEHICULAR SEAT (CONT).

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

REASSEMBLY

1

2

3

4

5

6

7

Position right bearing plate (1), retaining

strap (2), and vehicular seat (3) on

vehicular seat support (4). Install four

hexagon head capscrews (5), four new

Iockwashers (6), and four hexagon plain

nuts (7).

Position left bearing plate (8) and double

angle bracket (9) on vehicular seat

support (4). Install two hexagon head

capscrews (10), two new Iockwashers

(11), and two hexagon plain nuts (12).

Install lock-release lever (13) in vehicular

seat (3). Install headed straight pin (14) in

lock-release lever to secure lock-release

lever. Install new cotter pin (15) in

headed straight pin.

Install compression helical spring (16) and

shaft collar (17) in vehicular seat (13).

Install headless straight pin (18) through

compression helical spring and shaft col-

lar.

Line up holes in shaft collar (17) and

headless straight pin (18). Install

headless straight pin (19) through shaft

collar and headless straight pin.

Install vehicular seat cushion (20) on

vehicular seat (3).

Install seat back cushion (21) in vehicular

seat (3).

2-958