TM-9-2350-238-20-2

CRANE (CAB) COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT,ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1993

CHANGE 1

TM-9-2350-238-20-2 - Page 259 of 495

TM 9-2350-238-20- 2

20

Disconnect hull return line nonmetalli c

hose assembly (41) from slip ring (42)

and tube elbow (43) .

21

Remove tube elbow (43), tube fittin g

locknut (44), packing retainer (45), an d

preformed packing (46) from flow divide r

hydraulic manifold (40) .

22

Disconnect hand pump suction meta l

tube assembly (47) from two tube nip -

ples (48 and 49) .

23

Remove tube nippIe (48) and preforme d

packing (50) from flow divider hydrauli c

manifold (40) .

24

Remove tube nipple (49) and preforme d

packing (51) .

25

Disconnect hand pump pressure meta l

tube assembly (52) from tube reduce r

(53) and tube tee (25) .

26

Remove tube reducer (53) and preforme d

packing (54) .

27

Remove tube tee (25), tube fittin g

locknut (55), flat washer (56), an d

preformed packing (57) from flow divide r

hydraulic manifold (40) .

28

Remove hydraulic hand pump webbin g

strap (58) from hydraulic hand pum p

shouldered shaft (59) .

29

If damaged, remove hand pump handl e

grip (60) from hydraulic hand pum p

shouldered shaft (59) .

30

Remove spring pin (61) and hydrauli c

hand pump shouldered shaft (59) fro m

reciprocating pump (62) .

31

Remove two hexagon head capscrew s

(63), two Iockwashers (64), an d

reciprocating pump (62) .

DISASSEMBLY

Refer to page 2-73 for complete disassembl y

of all hydraulic lines and fittings .

INSPECTION/REPAI R

1

Check for broken, damaged, or missin g

parts .

2

Repair is by replacement of authorize d

parts (TM 9-2350-238-24P-2) .

REASSEMBL Y

Refer to page 2-73 for complete reassembl y

of all hydraulic lines and fittings .

2-21 9