TM-9-2350-238-34-1

HULL AND RELATED COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

MARCH 1994

TM-9-2350-238-34-1 - Page 218 of 292

TM 9-2350-238-34-1

3-6. MAINTENANCE OF DOUBLE ROTARY PUMP (CONT) .

DISASSEMBLY (CONT )

Wipe up any spilled hydraulic fluid to prevent injury to personnel.

Disassembly of hydraulic pumps must be performed in a clean, dry, dust-free area.

NOT E

There are two different manufacturers of the double rotary pump. They are interchange-

able as an assembly, but differ internally for repair.

13

Using a suitable container, drain hydraulic fluid from pump. Rotate shaft slowly to drai n

remaining hydraulic fluid .

NOT E

●

To ensure correct position at reassembly, etch match marks on double rotary pump

housing and each cover using marking chalk.

●

Steps 14 thru 31 apply to Parker-Hannifin or Hydreco double rotary pumps only.

3-1 8