TM-9-2350-238-34-2

CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

APRIL 1992

TM-9-2350-238-34-2 - Page 180 of 327

TM 9-2350-238-34-2

ADJUSTMENT

●

Make sure all personnel stand clear when operating boom to avoid injury to personnel.

●

When testing hydraulic system, be sure boom is in stowed position as failure of system

may result in injury to personnel.

NOTE

Steps 1 thru 5 are written for one

pressure relief valve, but apply to all

three.

1 Adjust check valve. Refer to page 2-179.

2 Turn off hydraulic system (TM

9-2350-238-10).

3 Remove manifold tee tube cap (1) from

valve tube tee (2).

4 Install 500 psi (3448 Pa) oil pressure

tester on valve tube tee (2).

OIL PRESSURE

TESTER

2-167