TM-9-2350-238-34-2
CRANE (CAB) COMPONENTS, RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
APRIL 1992
TM-9-2350-238-34-2 - Page 60 of 327
TM 9-2350 -238-34-2
17
Working from motor end of cable reel
(11), install four 1.5-in. (3.8-cm) long by
3/8-in. (0.96-cm) diameter jacking
screws (26) in boom winch bearing
winch housing (27) and tighten until
boom winch bearing winch housing is
free. Remove jacking screws.
18 Remove boom winch bearing housing
(27) from cable reel (11).
19 Remove hexagon plain nut (1), washers
(19), and winch cylinder control collar
(2) from brake rod of stage one boom
winch carrier assembly (18).
2-47
Back to Top
