TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 153 of 948

TM 9-2350-256-20-1

0032 00

CORRECTIVE ACTION –Continued

10.

Inspect boom limit valves for proper adjustment. Adjust boom limit valves (see WP 0415 00). If any

defects exist, notify Direct Support Maintenance. If boom still operates with difficulty, notify Support

Maintenance. If boom operates properly but creeps (fails to maintain position), go to step 11.

WARNING

Do not attempt to loosen or tighten hydraulic fittings or lines when system is pressurized. Severe injury

or death to personnel may result.

11.

Inspect hydraulic lines and connections for leaks. Replace leaking hydraulic lines and tighten leaking

connections (see WP 0416 00). If leaks persist or boom continues to creep, notify Direct Support

Maintenance.

12.

Visually inspect stayline cables to ensure cable connections are intact. Adjust stayline cylinder

limit valves (see WP 0415 00). If cables still become slack after adjustment, notify Direct Support

Maintenance.

END OF WORK PACKAGE

0032 00-3/4 blank