TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 228 of 948

TM 9-2350-256-20-1

0048 00

CORRECTIVE ACTION –Continued

7.

Open air inlet doors (TM 9-2350-256-10). Disconnect bulkhead to engine bracket and rear fuel tank

transmitter wiring harness from bulkhead disconnect. Place red lead of multimeter in pin N of wire

31 and black lead to ground and check for voltage. If voltage is present, go to step 8. If voltage is not

present, repair/replace wire 31 of gage panel to bulkhead wiring harness (see WP 0194 00 for dual

voltage; 0195 00 for single voltage).

8.

Reconnect bulkhead to engine bracket and rear fuel tank transmitter wiring harness to bulkhead.

Disconnect wire 31 from rear fuel tank transmitter. Place red lead of multimeter in wire 31 and black

lead to ground and check for voltage. If voltage is present, replace rear fuel tank transmitter (see

WP 0121 00). If voltage is not present, repair/replace bulkhead to engine bracket and rear fuel tank

transmitter wiring harness (see WP 0222 00 for dual voltage; 0223 00 for single voltage).

END OF WORK PACKAGE

0048 00-6