TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 276 of 948

TM 9-2350-256-20-1

0055 00

CORRECTIVE ACTION –Continued

10.

Reconnect bulkhead to engine bracket and rear fuel tank transmitter to switching relay box. Disconnect

bulkhead to engine wiring harness and starter relay wiring harness from bulkhead. Place red lead of

multimeter in socket E of wire 1 and black lead to ground. Turn MASTER switch on, start engine,

close generator cutout switch and check for voltage. If voltage is present, go to step 11. If voltage is not

present, go to step 15.

11.

Reconnect bulkhead to engine bracket and rear fuel tank transmitter wiring harness to switching relay

box. Disconnect electrical accessories panel wiring harness from electrical accessories panel. Place

red lead of multimeter in socket C of wire 1 and black lead to ground. Turn MASTER switch on and

check for voltage. Turn MASTER switch OFF. If voltage is present, go to step 12. If voltage is not

present, repair/replace wire 1 of electrical accessories panel wiring harness.

0055 00-8