TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 314 of 948

TM 9-2350-256-20-1

0058 00

CORRECTIVE ACTION –Continued

5.

Place red lead of multimeter on pin N of wire 10/15 and black lead to ground. Turn MASTER switch

on and check for voltage. Turn MASTER switch OFF. If voltage is present, go to step 6. If voltage is

not present, go to step 8.

6.

Reconnect switch panel to gage panel and miscellaneous switches wiring harness to main switch panel.

Disconnect wire 25/27 from 15 A circuit breaker. Place red lead of multimeter on circuit breaker

terminal and black lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER

switch OFF. If voltage is present, repair/replace wire 27 of main lighting and B.O. selector switch

wiring harness (see WP 0218 00). If voltage is not present, go to step 7.

0058 00-6