TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 527 of 948

TM 9-2350-256-20-1

0083 00

CORRECTIVE ACTION –Continued

11.

Reconnect switch panel to gage panel and miscellaneous switches wiring harness to main switch panel.

Install main switch panel (15), flat washer (14), ground lead (13), three lockwashers (12), and three

screws (11). Open air inlet doors (TM 9-2350-256-10). Disconnect wire 48 pin A from bulkhead

to master relay wiring harness. Place red multimeter lead in socket and black lead to ground. Turn

MASTER switch on and check for voltage. If voltage is present, repair/replace switch panel, radio, and

bilge pump to bulkhead wiring harness (see WP 0202 00). If voltage is not present, troubleshoot master

relay circuit (see WP 0042 00).

END OF WORK PACKAGE

0083 00-9/10 blank