TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 607 of 948

TM 9-2350-256-20-1

0093 00

CORRECTIVE ACTION –Continued

9.

Reconnect batteries to master relay, voltage regulators, slave receptacle, and engine disconnect wiring

harness to engine disconnect. Disconnect wire K of starter module wiring harness from engine wiring

harness near engine disconnect. Place red lead of multimeter in female connector of wire K and black

lead to ground. Turn MASTER switch on and check for voltage. Turn MASTER switch OFF. If voltage

is present, repair/replace wire K of engine wiring harness (see WP 0207 00 for dual voltage; 0208 00

for single voltage). If voltage is not present, repair/replace wire K of module starter wiring harness (see

WP 0189 00).

END OF WORK PACKAGE

0093 00-7/8 blank