TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 700 of 948

TM 9-2350-256-20-1

0098 00

NOTE

Be sure that all tape, caps, and other protective closure items have been removed before installation.

2.

Install two preformed packings (77) on each side of transmission saddle (78).

WARNING

All personnel must stand clear during lifting operation. A swinging or shifting load may cause injury or

death to personnel.

3.

Install powerplant (75) in vehicle hull (76) using sling (74).

4.

Torque engine mount release rod (69) to 42–48 pound-feet (lb-ft) (57–65 newton-meters [N•m] ) to secure engine to hull.

NOTE

Perform step 5 if engine mount (68) was accessed and released from underneath the hull.

5.

Install access cover (70) with six lockwashers (72) and six screws (71).

0098 00-10