TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 823 of 948

TM 9-2350-256-20-1

0125 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

FUEL CONTROL VALVES AND ID PLATES REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Materials/Parts

Tape, sealant (item 34, WP 0489 00)

Bushings (4) (item 49, WP 0491 00)

Drivescrews (22) (item 501, WP 0491 00)

Lockwashers (4) (item 639, WP 0491 00)

Lockwashers (2) (item 640, WP 0491 00)

Lockwashers (2) (item 642, WP 0491 00)

Nuts (4) (item 758, WP 0491 00)

Nuts (4) (item 768, WP 0491 00)

Packings, preformed (4) (item 195, WP 0491 00)

Pins, shoulder (4) (item 48, WP 0491 00)

Materials/Parts (cont.)

Pins, spring (4) (item 448, WP 0491 00)

Pins, spring (16) (item 472, WP 0491 00)

Screw (item 415, WP 0491 00)

Setscrews (4) (item 749, WP 0491 00)

Washers, flat (5) (item 539, WP 0491 00)

Washers, flat (4) (item 541, WP 0491 00)

Equipment Condition

Powerplant removed (see WP 0098 00)

Fuel tank drain valves opened and fuel tank drained,

or fuel shutoff valves turned to OFF (refer to TM

9-2350-256-10)

WARNING

Do not smoke or use open flame when working on fuel system: explosion may occur, causing severe

injury or death.

NOTE

For installation purposes, parts indicated with an (*) need sealant tape.

0125 00-1