TM-9-2350-256-20-1

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 2

NOVEMBER 2005

TM-9-2350-256-20-1 - Page 857 of 948

TM 9-2350-256-20-1

0133 00

Installation

NOTE

If fuel return check valve (13) is removed, it must be installed with arrow pointing down.

1.

Install outlet elbow (12), fuel return check valve (13), and elbow (14) on solenoid valve (4).

2.

Install tee (11), elbow (10), and fuel solenoid inlet coupling (9) on solenoid valve (4).

3.

Install mounting bracket (5) with three assembled washer bolts (8).

4.

Install solenoid valve (4) with related fittings on mounting bracket (5) with two flat washers (7) and two assembled washer

bolts (6).

5.

Connect fuel solenoid outlet tube (2) and two fuel solenoid inlet tubes (3).

6.

Connect electrical wiring harness connector (1).

NOTE

Follow-on maintenance: Turn MASTER switch to ON position; Install engine deck (see WP 0336 00).

END OF WORK PACKAGE

0133 00-3/4 blank