TM-9-2350-256-20-2
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2
JUNE 2005
TM-9-2350-256-20-2 - Page 1031 of 1440
TM 9-2350-256-20-2
0404 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MAIN WINCH LEVEL WINDER CYLINDER ADJUSTMENT
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Wrench, spanner, hydraulic cylinder (item 64, WP 0490
00)
Wrench, spanner, level winder adjusting nut (item 65, WP
0490 00)
Equipment Condition
Cab subfloor plates removed as necessary (see WP 0287
00 thru 0308 00)
Adjustment
CAUTION
Reel in cable under a load heavy enough to keep cable tightly drawn and off ground. Do not reel in cable
under load in high gear.
1.
Remove lockplate (1) by removing two screws (2) on level winder cylinder (3).
2.
Loosen and slide back packing gland nut (4) using wrench (5).
0404 00-1
Back to Top
