TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1097 of 1440

TM 9-2350-256-20-2

0418 00

UNIT MAINTENANCE

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

NSN 2350-00-122-6826, EIC AQA

HYDRAULIC CONNECTING PANEL REPLACEMENT

REMOVAL, INSTALLATION

INITIAL SETUP:

Tools and Special Tools

Tool kit, general mechanic’s (item 59, WP 0490 00)

Materials/Parts

Sealant tape (item 34, WP 0489 00)

Gasket (item 29, WP 0491 00)

Lockwashers (10) (item 638, WP 0491 00)

Screws (10) (item 371, WP 0491 00)

Equipment Condition

Air cleaner (right-side) removed (see WP 0137 00)

Rear right-side floor plate removed (see WP 0291 00)

Hydraulic connections access cover removed (see WP

0292 00)

WARNING

Hydraulic fluid under pressure can penetrate skin or damage eyes. Fluid leaks under pressure may not

be visible, use a piece of cardboard or wood to find leaks, but do not use bare hand. Wear safety goggles

for protection. If fluid enters skin or eye, get immediate medical attention.

WARNING

Do not attempt to loosen or tighten hydraulic fittings or lines when the system is pressurized. Ensure

that the boom is in the stowed position before doing any maintenance on the hydraulic system.

Removal

1.

Disconnect hydraulic lines on both sides of the bulkhead and tag each line with the port number from which it was removed.

0418 00-1