TM-9-2350-256-20-2
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2
JUNE 2005
TM-9-2350-256-20-2 - Page 1113 of 1440
TM 9-2350-256-20-2
0423 00
UNIT MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
HYDRAULIC SUBPLATE ID PLATE REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Tools and Special Tools
Tool kit, general mechanic’s (item 59, WP 0490 00)
Materials/Parts
Drivescrews (4) (item 501, WP 0491 00)
Materials/Parts (cont.)
Lockwashers (4) (item 637, WP 0491 00)
Nuts (4) (item 673, WP 0491 00)
U-bolts (2) (item 85, WP 0491 00)
NOTE
Removal and installation procedures are the same for all plates.
Removal
1.
Remove four drivescrews (1) each from nine plates (2).
2.
Remove plate (3) by removing four nuts (4), four lockwashers (5), and two U-bolts (6).
Installation
1.
Install plate (3) with two U-bolts (6), four lockwashers (5), and four nuts (4).
2.
Install nine plates (2) with four drivescrews (1) each.
END OF WORK PACKAGE
0423 00-1/2 blank
Back to Top
