TM-9-2350-256-20-2

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 2

JUNE 2005

TM-9-2350-256-20-2 - Page 1148 of 1440

TM 9-2350-256-20-2

0436 00

Removal

1.

Remove clamp (1) from fuel line (2) by removing nut (3), lockwasher (4), flat washer (5), and screw (6).

2.

Remove U-bolt (7) from fuel line (8) by removing two nuts (9) and two lockwashers (10).

3.

Disconnect fuel lines (2 and 8) from the APU engine fuel filter fittings (11).

NOTE

Open drain cocks (12) on bottom of each filter and drain before removal of filters.

4.

Remove APU engine fuel filters and fittings (11) by removing three screws (13) and three lockwashers (14).

5.

Remove primary fuel filter (15) and secondary fuel filter (16) by removing from each one screw (17) and one flat washer

(18).

NOTE

Remove ID plate (19) only if required.

6.

Remove ID plate (19) by removing four drivescrews (20).

0436 00-2